Reading package lists... Building dependency tree... Reading state information... NOTICE: 'ruby-rest-client' packaging is maintained in the 'Git' version control system at: git://anonscm.debian.org/pkg-ruby-extras/ruby-rest-client.git Need to get 128 kB of source archives. Get:1 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-rest-client 1.8.0-1 (dsc) [2,241 B] Get:2 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-rest-client 1.8.0-1 (tar) [122 kB] Get:3 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-rest-client 1.8.0-1 (diff) [3,988 B] gpgv: keyblock resource `/tmp/.gnupg/trustedkeys.gpg': file open error gpgv: Signature made Wed 06 May 2015 04:17:54 PM UTC using RSA key ID F4DFBE99 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./ruby-rest-client_1.8.0-1.dsc dpkg-source: info: extracting ruby-rest-client in ruby-rest-client-1.8.0 dpkg-source: info: unpacking ruby-rest-client_1.8.0.orig.tar.gz dpkg-source: info: unpacking ruby-rest-client_1.8.0-1.debian.tar.xz Fetched 128 kB in 0s (11.9 MB/s) Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: bsdmainutils ca-certificates debhelper devscripts dh-python file gem2deb gem2deb-test-runner gettext gettext-base groff-base intltool-debian libasprintf0v5 libcroco3 libcurl3 libexpat1 libffi6 libglib2.0-0 libgmp-dev libgmpxx4ldbl libgnutls-deb0-28 libhogweed4 libhttp-parser2.1 libicu52 libidn11 libldap-2.4-2 libmagic1 libmpdec2 libnettle6 libp11-kit0 libpipeline1 libpython3-stdlib libpython3.4-minimal libpython3.4-stdlib librtmp1 libruby2.1 libruby2.2 libsasl2-2 libsasl2-modules-db libsqlite3-0 libssh2-1 libtasn1-6 libunistring0 libxml2 libyaml-0-2 man-db mime-support openssl po-debconf python3 python3-chardet python3-debian python3-minimal python3-pkg-resources python3-six python3.4 python3.4-minimal rake ruby ruby-addressable ruby-all-dev ruby-cookiejar ruby-crack ruby-diff-lcs ruby-domain-name ruby-em-http-request ruby-em-socksify ruby-escape-utils ruby-ethon ruby-eventmachine ruby-ffi ruby-http-cookie ruby-http-parser.rb ruby-httpclient ruby-mime-types ruby-minitest ruby-multi-json ruby-netrc ruby-power-assert ruby-rspec ruby-rspec-core ruby-rspec-expectations ruby-rspec-mocks ruby-rspec-support ruby-safe-yaml ruby-setup ruby-test-unit ruby-thread-order ruby-typhoeus ruby-unf ruby-unf-ext ruby-webmock ruby2.1 ruby2.1-dev ruby2.2 ruby2.2-dev rubygems-integration 0 upgraded, 97 newly installed, 0 to remove and 0 not upgraded. Need to get 36.7 MB of archives. After this operation, 140 MB of additional disk space will be used. Get:1 http://urika:3142/ftp.debian.org/debian/ sid/main libasprintf0v5 amd64 0.19.5.1-1 [32.2 kB] Get:2 http://urika:3142/ftp.debian.org/debian/ sid/main libnettle6 amd64 3.1.1-4 [189 kB] Get:3 http://urika:3142/ftp.debian.org/debian/ sid/main libhogweed4 amd64 3.1.1-4 [136 kB] Get:4 http://urika:3142/ftp.debian.org/debian/ sid/main libffi6 amd64 3.2.1-3 [20.1 kB] Get:5 http://urika:3142/ftp.debian.org/debian/ sid/main libp11-kit0 amd64 0.23.1-3 [112 kB] Get:6 http://urika:3142/ftp.debian.org/debian/ sid/main libtasn1-6 amd64 4.5-2 [49.6 kB] Get:7 http://urika:3142/ftp.debian.org/debian/ sid/main libgnutls-deb0-28 amd64 3.3.17-1 [716 kB] Get:8 http://urika:3142/ftp.debian.org/debian/ sid/main libsasl2-modules-db amd64 2.1.26.dfsg1-13 [67.0 kB] Get:9 http://urika:3142/ftp.debian.org/debian/ sid/main libsasl2-2 amd64 2.1.26.dfsg1-13 [104 kB] Get:10 http://urika:3142/ftp.debian.org/debian/ sid/main libldap-2.4-2 amd64 2.4.41+dfsg-1 [222 kB] Get:11 http://urika:3142/ftp.debian.org/debian/ sid/main libmagic1 amd64 1:5.22+15-2 [249 kB] Get:12 http://urika:3142/ftp.debian.org/debian/ sid/main libicu52 amd64 52.1-10 [6,786 kB] Get:13 http://urika:3142/ftp.debian.org/debian/ sid/main libxml2 amd64 2.9.2+dfsg1-3 [934 kB] Get:14 http://urika:3142/ftp.debian.org/debian/ sid/main groff-base amd64 1.22.3-1 [1,205 kB] Get:15 http://urika:3142/ftp.debian.org/debian/ sid/main bsdmainutils amd64 9.0.6 [183 kB] Get:16 http://urika:3142/ftp.debian.org/debian/ sid/main libpipeline1 amd64 1.4.1-1 [27.8 kB] Get:17 http://urika:3142/ftp.debian.org/debian/ sid/main man-db amd64 2.7.2-1 [1,000 kB] Get:18 http://urika:3142/ftp.debian.org/debian/ sid/main libglib2.0-0 amd64 2.44.1-1.1 [2,461 kB] Get:19 http://urika:3142/ftp.debian.org/debian/ sid/main libcroco3 amd64 0.6.8-3+b1 [135 kB] Get:20 http://urika:3142/ftp.debian.org/debian/ sid/main libmpdec2 amd64 2.4.1-1 [85.7 kB] Get:21 http://urika:3142/ftp.debian.org/debian/ sid/main libpython3.4-minimal amd64 3.4.3-8 [495 kB] Get:22 http://urika:3142/ftp.debian.org/debian/ sid/main mime-support all 3.59 [36.4 kB] Get:23 http://urika:3142/ftp.debian.org/debian/ sid/main libsqlite3-0 amd64 3.8.11.1-1 [454 kB] Get:24 http://urika:3142/ftp.debian.org/debian/ sid/main libpython3.4-stdlib amd64 3.4.3-8 [2,057 kB] Get:25 http://urika:3142/ftp.debian.org/debian/ sid/main libssh2-1 amd64 1.5.0-2+b1 [133 kB] Get:26 http://urika:3142/ftp.debian.org/debian/ sid/main libunistring0 amd64 0.9.3-5.2+b1 [288 kB] Get:27 http://urika:3142/ftp.debian.org/debian/ sid/main libyaml-0-2 amd64 0.1.6-3 [50.4 kB] Get:28 http://urika:3142/ftp.debian.org/debian/ sid/main libexpat1 amd64 2.1.0-7 [80.0 kB] Get:29 http://urika:3142/ftp.debian.org/debian/ sid/main python3.4-minimal amd64 3.4.3-8 [1,401 kB] Get:30 http://urika:3142/ftp.debian.org/debian/ sid/main python3-minimal amd64 3.4.3-4 [34.7 kB] Get:31 http://urika:3142/ftp.debian.org/debian/ sid/main python3.4 amd64 3.4.3-8 [219 kB] Get:32 http://urika:3142/ftp.debian.org/debian/ sid/main libpython3-stdlib amd64 3.4.3-4 [18.1 kB] Get:33 http://urika:3142/ftp.debian.org/debian/ sid/main dh-python all 2.20150728 [71.3 kB] Get:34 http://urika:3142/ftp.debian.org/debian/ sid/main python3 amd64 3.4.3-4 [21.1 kB] Get:35 http://urika:3142/ftp.debian.org/debian/ sid/main libhttp-parser2.1 amd64 2.1-2 [16.0 kB] Get:36 http://urika:3142/ftp.debian.org/debian/ sid/main file amd64 1:5.22+15-2 [60.1 kB] Get:37 http://urika:3142/ftp.debian.org/debian/ sid/main gettext-base amd64 0.19.5.1-1 [122 kB] Get:38 http://urika:3142/ftp.debian.org/debian/ sid/main libidn11 amd64 1.32-1 [171 kB] Get:39 http://urika:3142/ftp.debian.org/debian/ sid/main openssl amd64 1.0.2d-1 [695 kB] Get:40 http://urika:3142/ftp.debian.org/debian/ sid/main ca-certificates all 20150426 [208 kB] Get:41 http://urika:3142/ftp.debian.org/debian/ sid/main gettext amd64 0.19.5.1-1 [1,459 kB] Get:42 http://urika:3142/ftp.debian.org/debian/ sid/main intltool-debian all 0.35.0+20060710.2 [25.9 kB] Get:43 http://urika:3142/ftp.debian.org/debian/ sid/main po-debconf all 1.0.18 [248 kB] Get:44 http://urika:3142/ftp.debian.org/debian/ sid/main debhelper all 9.20150811 [817 kB] Get:45 http://urika:3142/ftp.debian.org/debian/ sid/main devscripts amd64 2.15.8 [908 kB] Get:46 http://urika:3142/ftp.debian.org/debian/ sid/main rubygems-integration all 1.9 [4,754 B] Get:47 http://urika:3142/ftp.debian.org/debian/ sid/main libruby2.1 amd64 2.1.5-4 [3,280 kB] Get:48 http://urika:3142/ftp.debian.org/debian/ sid/main ruby2.1 amd64 2.1.5-4 [276 kB] Get:49 http://urika:3142/ftp.debian.org/debian/ sid/main ruby all 1:2.1.5.1 [9,756 B] Get:50 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-power-assert all 0.2.3-1 [7,236 B] Get:51 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-test-unit all 3.1.2-1 [60.0 kB] Get:52 http://urika:3142/ftp.debian.org/debian/ sid/main libruby2.2 amd64 2.2.3-1 [3,098 kB] Get:53 http://urika:3142/ftp.debian.org/debian/ sid/main ruby2.2 amd64 2.2.3-1 [218 kB] Get:54 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-minitest all 5.8.0-1 [49.7 kB] Get:55 http://urika:3142/ftp.debian.org/debian/ sid/main gem2deb-test-runner all 0.21.1 [17.1 kB] Get:56 http://urika:3142/ftp.debian.org/debian/ sid/main python3-pkg-resources all 18.0.1-2 [44.2 kB] Get:57 http://urika:3142/ftp.debian.org/debian/ sid/main python3-chardet all 2.3.0-1 [96.1 kB] Get:58 http://urika:3142/ftp.debian.org/debian/ sid/main python3-six all 1.9.0-3 [13.7 kB] Get:59 http://urika:3142/ftp.debian.org/debian/ sid/main python3-debian all 0.1.27 [50.9 kB] Get:60 http://urika:3142/ftp.debian.org/debian/ sid/main libgmpxx4ldbl amd64 2:6.0.0+dfsg-7 [22.2 kB] Get:61 http://urika:3142/ftp.debian.org/debian/ sid/main libgmp-dev amd64 2:6.0.0+dfsg-7 [621 kB] Get:62 http://urika:3142/ftp.debian.org/debian/ sid/main ruby2.1-dev amd64 2.1.5-4 [1,103 kB] Get:63 http://urika:3142/ftp.debian.org/debian/ sid/main ruby2.2-dev amd64 2.2.3-1 [1,140 kB] Get:64 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-all-dev all 1:2.1.5.1 [9,188 B] Get:65 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-setup all 3.4.1-9 [34.2 kB] Get:66 http://urika:3142/ftp.debian.org/debian/ sid/main gem2deb all 0.21.1 [52.0 kB] Get:67 http://urika:3142/ftp.debian.org/debian/ sid/main librtmp1 amd64 2.4+20150115.gita107cef-1+b2 [60.1 kB] Get:68 http://urika:3142/ftp.debian.org/debian/ sid/main libcurl3 amd64 7.44.0-1 [267 kB] Get:69 http://urika:3142/ftp.debian.org/debian/ sid/main rake all 10.4.2-1 [49.0 kB] Get:70 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-addressable all 2.3.8-1 [47.6 kB] Get:71 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-cookiejar all 0.3.1-1 [13.1 kB] Get:72 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-safe-yaml all 1.0.4-1 [18.5 kB] Get:73 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-crack all 0.4.2-2 [8,474 B] Get:74 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-diff-lcs all 1.2.5-2 [26.7 kB] Get:75 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-unf-ext amd64 0.0.7.1-1+b2 [91.6 kB] Get:76 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-unf all 0.1.0-2 [4,230 B] Get:77 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-domain-name all 0.5.21-1 [66.8 kB] Get:78 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-escape-utils amd64 1.0.1-3+b1 [22.8 kB] Get:79 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-http-parser.rb amd64 0.6.0-3 [11.7 kB] Get:80 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-eventmachine amd64 1.0.7-3+b1 [140 kB] Get:81 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-em-socksify all 0.3.0-1 [6,484 B] Get:82 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-multi-json all 1.11.2-1 [18.9 kB] Get:83 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-em-http-request all 1.1.2-2 [19.6 kB] Get:84 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-ffi amd64 1.9.6debian-2+b1 [94.1 kB] Get:85 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-mime-types all 2.6.1-1 [120 kB] Get:86 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-ethon all 0.7.1-2 [31.3 kB] Get:87 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-http-cookie all 1.0.2-1 [22.3 kB] Get:88 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-httpclient all 2.3.3-3.1 [110 kB] Get:89 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-netrc all 0.10.3-1 [6,278 B] Get:90 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-rspec-support all 3.3.0c2e1m2s0-1 [24.4 kB] Get:91 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-rspec-expectations all 3.3.0c2e1m2s0-1 [90.5 kB] Get:92 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-rspec-mocks all 3.3.0c2e1m2s0-1 [88.4 kB] Get:93 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-thread-order all 1.1.0-1 [5,096 B] Get:94 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-rspec-core all 3.3.0c2e1m2s0-1 [174 kB] Get:95 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-rspec all 3.3.0c2e1m2s0-1 [6,692 B] Get:96 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-typhoeus all 0.7.1-2 [31.9 kB] Get:97 http://urika:3142/ftp.debian.org/debian/ sid/main ruby-webmock all 1.19.0-1 [42.7 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 36.7 MB in 0s (54.2 MB/s) Selecting previously unselected package libasprintf0v5:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 15408 files and directories currently installed.) Preparing to unpack .../libasprintf0v5_0.19.5.1-1_amd64.deb ... Unpacking libasprintf0v5:amd64 (0.19.5.1-1) ... Selecting previously unselected package libnettle6:amd64. Preparing to unpack .../libnettle6_3.1.1-4_amd64.deb ... Unpacking libnettle6:amd64 (3.1.1-4) ... Selecting previously unselected package libhogweed4:amd64. Preparing to unpack .../libhogweed4_3.1.1-4_amd64.deb ... Unpacking libhogweed4:amd64 (3.1.1-4) ... Selecting previously unselected package libffi6:amd64. Preparing to unpack .../libffi6_3.2.1-3_amd64.deb ... Unpacking libffi6:amd64 (3.2.1-3) ... Selecting previously unselected package libp11-kit0:amd64. Preparing to unpack .../libp11-kit0_0.23.1-3_amd64.deb ... Unpacking libp11-kit0:amd64 (0.23.1-3) ... Selecting previously unselected package libtasn1-6:amd64. Preparing to unpack .../libtasn1-6_4.5-2_amd64.deb ... Unpacking libtasn1-6:amd64 (4.5-2) ... Selecting previously unselected package libgnutls-deb0-28:amd64. Preparing to unpack .../libgnutls-deb0-28_3.3.17-1_amd64.deb ... Unpacking libgnutls-deb0-28:amd64 (3.3.17-1) ... Selecting previously unselected package libsasl2-modules-db:amd64. Preparing to unpack .../libsasl2-modules-db_2.1.26.dfsg1-13_amd64.deb ... Unpacking libsasl2-modules-db:amd64 (2.1.26.dfsg1-13) ... Selecting previously unselected package libsasl2-2:amd64. Preparing to unpack .../libsasl2-2_2.1.26.dfsg1-13_amd64.deb ... Unpacking libsasl2-2:amd64 (2.1.26.dfsg1-13) ... Selecting previously unselected package libldap-2.4-2:amd64. Preparing to unpack .../libldap-2.4-2_2.4.41+dfsg-1_amd64.deb ... Unpacking libldap-2.4-2:amd64 (2.4.41+dfsg-1) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../libmagic1_1%3a5.22+15-2_amd64.deb ... Unpacking libmagic1:amd64 (1:5.22+15-2) ... Selecting previously unselected package libicu52:amd64. Preparing to unpack .../libicu52_52.1-10_amd64.deb ... Unpacking libicu52:amd64 (52.1-10) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../libxml2_2.9.2+dfsg1-3_amd64.deb ... Unpacking libxml2:amd64 (2.9.2+dfsg1-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../groff-base_1.22.3-1_amd64.deb ... Unpacking groff-base (1.22.3-1) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../bsdmainutils_9.0.6_amd64.deb ... Unpacking bsdmainutils (9.0.6) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../libpipeline1_1.4.1-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.4.1-1) ... Selecting previously unselected package man-db. Preparing to unpack .../man-db_2.7.2-1_amd64.deb ... Unpacking man-db (2.7.2-1) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../libglib2.0-0_2.44.1-1.1_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.44.1-1.1) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../libcroco3_0.6.8-3+b1_amd64.deb ... Unpacking libcroco3:amd64 (0.6.8-3+b1) ... Selecting previously unselected package libmpdec2:amd64. Preparing to unpack .../libmpdec2_2.4.1-1_amd64.deb ... Unpacking libmpdec2:amd64 (2.4.1-1) ... Selecting previously unselected package libpython3.4-minimal:amd64. Preparing to unpack .../libpython3.4-minimal_3.4.3-8_amd64.deb ... Unpacking libpython3.4-minimal:amd64 (3.4.3-8) ... Selecting previously unselected package mime-support. Preparing to unpack .../mime-support_3.59_all.deb ... Unpacking mime-support (3.59) ... Selecting previously unselected package libsqlite3-0:amd64. Preparing to unpack .../libsqlite3-0_3.8.11.1-1_amd64.deb ... Unpacking libsqlite3-0:amd64 (3.8.11.1-1) ... Selecting previously unselected package libpython3.4-stdlib:amd64. Preparing to unpack .../libpython3.4-stdlib_3.4.3-8_amd64.deb ... Unpacking libpython3.4-stdlib:amd64 (3.4.3-8) ... Selecting previously unselected package libssh2-1:amd64. Preparing to unpack .../libssh2-1_1.5.0-2+b1_amd64.deb ... Unpacking libssh2-1:amd64 (1.5.0-2+b1) ... Selecting previously unselected package libunistring0:amd64. Preparing to unpack .../libunistring0_0.9.3-5.2+b1_amd64.deb ... Unpacking libunistring0:amd64 (0.9.3-5.2+b1) ... Selecting previously unselected package libyaml-0-2:amd64. Preparing to unpack .../libyaml-0-2_0.1.6-3_amd64.deb ... Unpacking libyaml-0-2:amd64 (0.1.6-3) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../libexpat1_2.1.0-7_amd64.deb ... Unpacking libexpat1:amd64 (2.1.0-7) ... Selecting previously unselected package python3.4-minimal. Preparing to unpack .../python3.4-minimal_3.4.3-8_amd64.deb ... Unpacking python3.4-minimal (3.4.3-8) ... Selecting previously unselected package python3-minimal. Preparing to unpack .../python3-minimal_3.4.3-4_amd64.deb ... Unpacking python3-minimal (3.4.3-4) ... Selecting previously unselected package python3.4. Preparing to unpack .../python3.4_3.4.3-8_amd64.deb ... Unpacking python3.4 (3.4.3-8) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../libpython3-stdlib_3.4.3-4_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.4.3-4) ... Selecting previously unselected package dh-python. Preparing to unpack .../dh-python_2.20150728_all.deb ... Unpacking dh-python (2.20150728) ... Setting up libpython3.4-minimal:amd64 (3.4.3-8) ... Setting up libexpat1:amd64 (2.1.0-7) ... Setting up python3.4-minimal (3.4.3-8) ... Setting up python3-minimal (3.4.3-4) ... Processing triggers for libc-bin (2.19-19) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 17120 files and directories currently installed.) Preparing to unpack .../python3_3.4.3-4_amd64.deb ... Unpacking python3 (3.4.3-4) ... Selecting previously unselected package libhttp-parser2.1:amd64. Preparing to unpack .../libhttp-parser2.1_2.1-2_amd64.deb ... Unpacking libhttp-parser2.1:amd64 (2.1-2) ... Selecting previously unselected package file. Preparing to unpack .../file_1%3a5.22+15-2_amd64.deb ... Unpacking file (1:5.22+15-2) ... Selecting previously unselected package gettext-base. Preparing to unpack .../gettext-base_0.19.5.1-1_amd64.deb ... Unpacking gettext-base (0.19.5.1-1) ... Selecting previously unselected package libidn11:amd64. Preparing to unpack .../libidn11_1.32-1_amd64.deb ... Unpacking libidn11:amd64 (1.32-1) ... Selecting previously unselected package openssl. Preparing to unpack .../openssl_1.0.2d-1_amd64.deb ... Unpacking openssl (1.0.2d-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../ca-certificates_20150426_all.deb ... Unpacking ca-certificates (20150426) ... Selecting previously unselected package gettext. Preparing to unpack .../gettext_0.19.5.1-1_amd64.deb ... Unpacking gettext (0.19.5.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../intltool-debian_0.35.0+20060710.2_all.deb ... Unpacking intltool-debian (0.35.0+20060710.2) ... Selecting previously unselected package po-debconf. Preparing to unpack .../po-debconf_1.0.18_all.deb ... Unpacking po-debconf (1.0.18) ... Selecting previously unselected package debhelper. Preparing to unpack .../debhelper_9.20150811_all.deb ... Unpacking debhelper (9.20150811) ... Selecting previously unselected package devscripts. Preparing to unpack .../devscripts_2.15.8_amd64.deb ... Unpacking devscripts (2.15.8) ... Selecting previously unselected package rubygems-integration. Preparing to unpack .../rubygems-integration_1.9_all.deb ... Unpacking rubygems-integration (1.9) ... Selecting previously unselected package libruby2.1:amd64. Preparing to unpack .../libruby2.1_2.1.5-4_amd64.deb ... Unpacking libruby2.1:amd64 (2.1.5-4) ... Selecting previously unselected package ruby2.1. Preparing to unpack .../ruby2.1_2.1.5-4_amd64.deb ... Unpacking ruby2.1 (2.1.5-4) ... Selecting previously unselected package ruby. Preparing to unpack .../ruby_1%3a2.1.5.1_all.deb ... Unpacking ruby (1:2.1.5.1) ... Selecting previously unselected package ruby-power-assert. Preparing to unpack .../ruby-power-assert_0.2.3-1_all.deb ... Unpacking ruby-power-assert (0.2.3-1) ... Selecting previously unselected package ruby-test-unit. Preparing to unpack .../ruby-test-unit_3.1.2-1_all.deb ... Unpacking ruby-test-unit (3.1.2-1) ... Selecting previously unselected package libruby2.2:amd64. Preparing to unpack .../libruby2.2_2.2.3-1_amd64.deb ... Unpacking libruby2.2:amd64 (2.2.3-1) ... Selecting previously unselected package ruby2.2. Preparing to unpack .../ruby2.2_2.2.3-1_amd64.deb ... Unpacking ruby2.2 (2.2.3-1) ... Selecting previously unselected package ruby-minitest. Preparing to unpack .../ruby-minitest_5.8.0-1_all.deb ... Unpacking ruby-minitest (5.8.0-1) ... Selecting previously unselected package gem2deb-test-runner. Preparing to unpack .../gem2deb-test-runner_0.21.1_all.deb ... Unpacking gem2deb-test-runner (0.21.1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../python3-pkg-resources_18.0.1-2_all.deb ... Unpacking python3-pkg-resources (18.0.1-2) ... Selecting previously unselected package python3-chardet. Preparing to unpack .../python3-chardet_2.3.0-1_all.deb ... Unpacking python3-chardet (2.3.0-1) ... Selecting previously unselected package python3-six. Preparing to unpack .../python3-six_1.9.0-3_all.deb ... Unpacking python3-six (1.9.0-3) ... Selecting previously unselected package python3-debian. Preparing to unpack .../python3-debian_0.1.27_all.deb ... Unpacking python3-debian (0.1.27) ... Selecting previously unselected package libgmpxx4ldbl:amd64. Preparing to unpack .../libgmpxx4ldbl_2%3a6.0.0+dfsg-7_amd64.deb ... Unpacking libgmpxx4ldbl:amd64 (2:6.0.0+dfsg-7) ... Selecting previously unselected package libgmp-dev:amd64. Preparing to unpack .../libgmp-dev_2%3a6.0.0+dfsg-7_amd64.deb ... Unpacking libgmp-dev:amd64 (2:6.0.0+dfsg-7) ... Selecting previously unselected package ruby2.1-dev:amd64. Preparing to unpack .../ruby2.1-dev_2.1.5-4_amd64.deb ... Unpacking ruby2.1-dev:amd64 (2.1.5-4) ... Selecting previously unselected package ruby2.2-dev:amd64. Preparing to unpack .../ruby2.2-dev_2.2.3-1_amd64.deb ... Unpacking ruby2.2-dev:amd64 (2.2.3-1) ... Selecting previously unselected package ruby-all-dev. Preparing to unpack .../ruby-all-dev_1%3a2.1.5.1_all.deb ... Unpacking ruby-all-dev (1:2.1.5.1) ... Selecting previously unselected package ruby-setup. Preparing to unpack .../ruby-setup_3.4.1-9_all.deb ... Unpacking ruby-setup (3.4.1-9) ... Selecting previously unselected package gem2deb. Preparing to unpack .../gem2deb_0.21.1_all.deb ... Unpacking gem2deb (0.21.1) ... Selecting previously unselected package librtmp1:amd64. Preparing to unpack .../librtmp1_2.4+20150115.gita107cef-1+b2_amd64.deb ... Unpacking librtmp1:amd64 (2.4+20150115.gita107cef-1+b2) ... Selecting previously unselected package libcurl3:amd64. Preparing to unpack .../libcurl3_7.44.0-1_amd64.deb ... Unpacking libcurl3:amd64 (7.44.0-1) ... Selecting previously unselected package rake. Preparing to unpack .../archives/rake_10.4.2-1_all.deb ... Unpacking rake (10.4.2-1) ... Selecting previously unselected package ruby-addressable. Preparing to unpack .../ruby-addressable_2.3.8-1_all.deb ... Unpacking ruby-addressable (2.3.8-1) ... Selecting previously unselected package ruby-cookiejar. Preparing to unpack .../ruby-cookiejar_0.3.1-1_all.deb ... Unpacking ruby-cookiejar (0.3.1-1) ... Selecting previously unselected package ruby-safe-yaml. Preparing to unpack .../ruby-safe-yaml_1.0.4-1_all.deb ... Unpacking ruby-safe-yaml (1.0.4-1) ... Selecting previously unselected package ruby-crack. Preparing to unpack .../ruby-crack_0.4.2-2_all.deb ... Unpacking ruby-crack (0.4.2-2) ... Selecting previously unselected package ruby-diff-lcs. Preparing to unpack .../ruby-diff-lcs_1.2.5-2_all.deb ... Unpacking ruby-diff-lcs (1.2.5-2) ... Selecting previously unselected package ruby-unf-ext. Preparing to unpack .../ruby-unf-ext_0.0.7.1-1+b2_amd64.deb ... Unpacking ruby-unf-ext (0.0.7.1-1+b2) ... Selecting previously unselected package ruby-unf. Preparing to unpack .../ruby-unf_0.1.0-2_all.deb ... Unpacking ruby-unf (0.1.0-2) ... Selecting previously unselected package ruby-domain-name. Preparing to unpack .../ruby-domain-name_0.5.21-1_all.deb ... Unpacking ruby-domain-name (0.5.21-1) ... Selecting previously unselected package ruby-escape-utils. Preparing to unpack .../ruby-escape-utils_1.0.1-3+b1_amd64.deb ... Unpacking ruby-escape-utils (1.0.1-3+b1) ... Selecting previously unselected package ruby-http-parser.rb. Preparing to unpack .../ruby-http-parser.rb_0.6.0-3_amd64.deb ... Unpacking ruby-http-parser.rb (0.6.0-3) ... Selecting previously unselected package ruby-eventmachine. Preparing to unpack .../ruby-eventmachine_1.0.7-3+b1_amd64.deb ... Unpacking ruby-eventmachine (1.0.7-3+b1) ... Selecting previously unselected package ruby-em-socksify. Preparing to unpack .../ruby-em-socksify_0.3.0-1_all.deb ... Unpacking ruby-em-socksify (0.3.0-1) ... Selecting previously unselected package ruby-multi-json. Preparing to unpack .../ruby-multi-json_1.11.2-1_all.deb ... Unpacking ruby-multi-json (1.11.2-1) ... Selecting previously unselected package ruby-em-http-request. Preparing to unpack .../ruby-em-http-request_1.1.2-2_all.deb ... Unpacking ruby-em-http-request (1.1.2-2) ... Selecting previously unselected package ruby-ffi. Preparing to unpack .../ruby-ffi_1.9.6debian-2+b1_amd64.deb ... Unpacking ruby-ffi (1.9.6debian-2+b1) ... Selecting previously unselected package ruby-mime-types. Preparing to unpack .../ruby-mime-types_2.6.1-1_all.deb ... Unpacking ruby-mime-types (2.6.1-1) ... Selecting previously unselected package ruby-ethon. Preparing to unpack .../ruby-ethon_0.7.1-2_all.deb ... Unpacking ruby-ethon (0.7.1-2) ... Selecting previously unselected package ruby-http-cookie. Preparing to unpack .../ruby-http-cookie_1.0.2-1_all.deb ... Unpacking ruby-http-cookie (1.0.2-1) ... Selecting previously unselected package ruby-httpclient. Preparing to unpack .../ruby-httpclient_2.3.3-3.1_all.deb ... Unpacking ruby-httpclient (2.3.3-3.1) ... Selecting previously unselected package ruby-netrc. Preparing to unpack .../ruby-netrc_0.10.3-1_all.deb ... Unpacking ruby-netrc (0.10.3-1) ... Selecting previously unselected package ruby-rspec-support. Preparing to unpack .../ruby-rspec-support_3.3.0c2e1m2s0-1_all.deb ... Unpacking ruby-rspec-support (3.3.0c2e1m2s0-1) ... Selecting previously unselected package ruby-rspec-expectations. Preparing to unpack .../ruby-rspec-expectations_3.3.0c2e1m2s0-1_all.deb ... Unpacking ruby-rspec-expectations (3.3.0c2e1m2s0-1) ... Selecting previously unselected package ruby-rspec-mocks. Preparing to unpack .../ruby-rspec-mocks_3.3.0c2e1m2s0-1_all.deb ... Unpacking ruby-rspec-mocks (3.3.0c2e1m2s0-1) ... Selecting previously unselected package ruby-thread-order. Preparing to unpack .../ruby-thread-order_1.1.0-1_all.deb ... Unpacking ruby-thread-order (1.1.0-1) ... Selecting previously unselected package ruby-rspec-core. Preparing to unpack .../ruby-rspec-core_3.3.0c2e1m2s0-1_all.deb ... Unpacking ruby-rspec-core (3.3.0c2e1m2s0-1) ... Selecting previously unselected package ruby-rspec. Preparing to unpack .../ruby-rspec_3.3.0c2e1m2s0-1_all.deb ... Unpacking ruby-rspec (3.3.0c2e1m2s0-1) ... Selecting previously unselected package ruby-typhoeus. Preparing to unpack .../ruby-typhoeus_0.7.1-2_all.deb ... Unpacking ruby-typhoeus (0.7.1-2) ... Selecting previously unselected package ruby-webmock. Preparing to unpack .../ruby-webmock_1.19.0-1_all.deb ... Unpacking ruby-webmock (1.19.0-1) ... Setting up libasprintf0v5:amd64 (0.19.5.1-1) ... Setting up libnettle6:amd64 (3.1.1-4) ... Setting up libhogweed4:amd64 (3.1.1-4) ... Setting up libffi6:amd64 (3.2.1-3) ... Setting up libp11-kit0:amd64 (0.23.1-3) ... Setting up libtasn1-6:amd64 (4.5-2) ... Setting up libgnutls-deb0-28:amd64 (3.3.17-1) ... Setting up libsasl2-modules-db:amd64 (2.1.26.dfsg1-13) ... Setting up libsasl2-2:amd64 (2.1.26.dfsg1-13) ... Setting up libldap-2.4-2:amd64 (2.4.41+dfsg-1) ... Setting up libmagic1:amd64 (1:5.22+15-2) ... Setting up libicu52:amd64 (52.1-10) ... Setting up libxml2:amd64 (2.9.2+dfsg1-3) ... Setting up groff-base (1.22.3-1) ... Setting up bsdmainutils (9.0.6) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libpipeline1:amd64 (1.4.1-1) ... Setting up man-db (2.7.2-1) ... Building database of manual pages ... Setting up libglib2.0-0:amd64 (2.44.1-1.1) ... No schema files found: doing nothing. Setting up libcroco3:amd64 (0.6.8-3+b1) ... Setting up libmpdec2:amd64 (2.4.1-1) ... Setting up mime-support (3.59) ... Setting up libsqlite3-0:amd64 (3.8.11.1-1) ... Setting up libpython3.4-stdlib:amd64 (3.4.3-8) ... Setting up libssh2-1:amd64 (1.5.0-2+b1) ... Setting up libunistring0:amd64 (0.9.3-5.2+b1) ... Setting up libyaml-0-2:amd64 (0.1.6-3) ... Setting up python3.4 (3.4.3-8) ... Setting up libpython3-stdlib:amd64 (3.4.3-4) ... Setting up libhttp-parser2.1:amd64 (2.1-2) ... Setting up file (1:5.22+15-2) ... Setting up gettext-base (0.19.5.1-1) ... Setting up libidn11:amd64 (1.32-1) ... Setting up openssl (1.0.2d-1) ... Setting up ca-certificates (20150426) ... Setting up gettext (0.19.5.1-1) ... Setting up intltool-debian (0.35.0+20060710.2) ... Setting up po-debconf (1.0.18) ... Setting up debhelper (9.20150811) ... Setting up rubygems-integration (1.9) ... Setting up libruby2.1:amd64 (2.1.5-4) ... Setting up ruby2.1 (2.1.5-4) ... Setting up ruby (1:2.1.5.1) ... Setting up ruby-power-assert (0.2.3-1) ... Setting up ruby-test-unit (3.1.2-1) ... Setting up libruby2.2:amd64 (2.2.3-1) ... Setting up ruby2.2 (2.2.3-1) ... Setting up ruby-minitest (5.8.0-1) ... Setting up gem2deb-test-runner (0.21.1) ... Setting up libgmpxx4ldbl:amd64 (2:6.0.0+dfsg-7) ... Setting up libgmp-dev:amd64 (2:6.0.0+dfsg-7) ... Setting up ruby2.1-dev:amd64 (2.1.5-4) ... Setting up ruby2.2-dev:amd64 (2.2.3-1) ... Setting up ruby-all-dev (1:2.1.5.1) ... Setting up ruby-setup (3.4.1-9) ... Setting up librtmp1:amd64 (2.4+20150115.gita107cef-1+b2) ... Setting up libcurl3:amd64 (7.44.0-1) ... Setting up rake (10.4.2-1) ... Setting up ruby-addressable (2.3.8-1) ... Setting up ruby-cookiejar (0.3.1-1) ... Setting up ruby-safe-yaml (1.0.4-1) ... Setting up ruby-crack (0.4.2-2) ... Setting up ruby-diff-lcs (1.2.5-2) ... Setting up ruby-unf-ext (0.0.7.1-1+b2) ... Setting up ruby-unf (0.1.0-2) ... Setting up ruby-domain-name (0.5.21-1) ... Setting up ruby-escape-utils (1.0.1-3+b1) ... Setting up ruby-http-parser.rb (0.6.0-3) ... Setting up ruby-eventmachine (1.0.7-3+b1) ... Setting up ruby-em-socksify (0.3.0-1) ... Setting up ruby-multi-json (1.11.2-1) ... Setting up ruby-em-http-request (1.1.2-2) ... Setting up ruby-ffi (1.9.6debian-2+b1) ... Setting up ruby-mime-types (2.6.1-1) ... Setting up ruby-ethon (0.7.1-2) ... Setting up ruby-http-cookie (1.0.2-1) ... Setting up ruby-httpclient (2.3.3-3.1) ... Setting up ruby-netrc (0.10.3-1) ... Setting up ruby-rspec-support (3.3.0c2e1m2s0-1) ... Setting up ruby-rspec-expectations (3.3.0c2e1m2s0-1) ... Setting up ruby-rspec-mocks (3.3.0c2e1m2s0-1) ... Setting up ruby-thread-order (1.1.0-1) ... Setting up ruby-rspec-core (3.3.0c2e1m2s0-1) ... Setting up ruby-rspec (3.3.0c2e1m2s0-1) ... Setting up ruby-typhoeus (0.7.1-2) ... Setting up ruby-webmock (1.19.0-1) ... Setting up python3 (3.4.3-4) ... Setting up devscripts (2.15.8) ... Setting up python3-pkg-resources (18.0.1-2) ... Setting up python3-chardet (2.3.0-1) ... Setting up python3-six (1.9.0-3) ... Setting up python3-debian (0.1.27) ... Setting up gem2deb (0.21.1) ... Setting up dh-python (2.20150728) ... Processing triggers for libc-bin (2.19-19) ... Processing triggers for ca-certificates (20150426) ... Updating certificates in /etc/ssl/certs... 180 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Killed old client process Internet Systems Consortium DHCP Client 4.3.2 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/be:76:17:40:31:4e Sending on LPF/eth0/be:76:17:40:31:4e Sending on Socket/fallback DHCPRELEASE on eth0 to 10.0.3.1 port 67 dpkg-buildpackage: source package ruby-rest-client dpkg-buildpackage: source version 1.8.0-1 dpkg-buildpackage: source distribution unstable dpkg-buildpackage: source changed by Lucas Nussbaum dpkg-source --before-build ruby-rest-client-1.8.0 dpkg-buildpackage: host architecture amd64 debian/rules clean dh clean --buildsystem=ruby --with ruby dh_testdir -O--buildsystem=ruby dh_auto_clean -O--buildsystem=ruby dh_ruby --clean dh_ruby --clean dh_clean -O--buildsystem=ruby dpkg-source -b ruby-rest-client-1.8.0 dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building ruby-rest-client using existing ./ruby-rest-client_1.8.0.orig.tar.gz dpkg-source: info: building ruby-rest-client in ruby-rest-client_1.8.0-1.debian.tar.xz dpkg-source: info: building ruby-rest-client in ruby-rest-client_1.8.0-1.dsc debian/rules build dh build --buildsystem=ruby --with ruby dh_testdir -O--buildsystem=ruby dh_auto_configure -O--buildsystem=ruby dh_ruby --configure dh_auto_build -O--buildsystem=ruby dh_ruby --build dh_ruby --build dh_auto_test -O--buildsystem=ruby dh_ruby --test debian/rules binary dh binary --buildsystem=ruby --with ruby dh_testroot -O--buildsystem=ruby dh_prep -O--buildsystem=ruby dh_auto_install -O--buildsystem=ruby dh_ruby --install /ruby-rest-client-1.8.0/debian/ruby-rest-client dh_ruby --install ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install files │ └──────────────────────────────────────────────────────────────────────────────┘ install -d /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/bin install -D -m755 /ruby-rest-client-1.8.0/bin/restclient /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/bin/restclient install -d /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby install -D -m644 /ruby-rest-client-1.8.0/lib/rest_client.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/rest_client.rb install -D -m644 /ruby-rest-client-1.8.0/lib/rest-client.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/rest-client.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/response.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/response.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/payload.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/payload.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/raw_response.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/raw_response.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/request.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/request.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/windows.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/windows.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/abstract_response.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/abstract_response.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/resource.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/resource.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/exceptions.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/exceptions.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/version.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/version.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/windows/root_certs.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/windows/root_certs.rb install -D -m644 /ruby-rest-client-1.8.0/lib/restclient/platform.rb /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby/restclient/platform.rb Rewriting shebang line of /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/bin/restclient ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install Rubygems integration metadata │ └──────────────────────────────────────────────────────────────────────────────┘ generating gemspec at /ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/share/rubygems-integration/all/specifications/rest-client-1.8.0.gemspec /usr/bin/ruby2.1 /usr/bin/gem2deb-test-runner ┌──────────────────────────────────────────────────────────────────────────────┐ │ Run tests for ruby2.1 from debian/ruby-tests.rake │ └──────────────────────────────────────────────────────────────────────────────┘ RUBYLIB=/ruby-rest-client-1.8.0/debian/ruby-rest-client/usr/lib/ruby/vendor_ruby:. rake2.1 -f debian/ruby-tests.rake /usr/bin/ruby2.1 /usr/bin/rspec --pattern ./spec/\*\*/\*_spec.rb Randomized with seed 41161 ..................................FF.........................................................................F............................FFFFFFFF........................WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. WARNING: Using the `raise_error` matcher without providing a specific error or message risks false positives, since `raise_error` will match when Ruby raises a `NoMethodError`, `NameError` or `ArgumentError`, potentially allowing the expectation to pass without even executing the method you are intending to call. Instead consider providing a specific error class or message. This message can be supressed by setting: `RSpec::Expectations.configuration.warn_about_potential_false_positives = false`. Called from /ruby-rest-client-1.8.0/spec/unit/response_spec.rb:72:in `block (4 levels) in '. ....................................................... Failures: 1) RestClient::Request proxy creates a non-proxy class if a proxy url is not given Failure/Error: @request.net_http_class.proxy_class?.should be_false expected false to respond to `false?` or perhaps you meant `be false` or `be_falsey` # ./spec/unit/request_spec.rb:364:in `block (3 levels) in ' 2) RestClient::Request proxy creates a proxy class if a proxy url is given Failure/Error: @request.net_http_class.proxy_class?.should be_true expected true to respond to `true?` or perhaps you meant `be true` or `be_truthy` # ./spec/unit/request_spec.rb:360:in `block (3 levels) in ' 3) RestClient::Request closes payload if not nil Failure/Error: test_file.closed?.should be_true expected true to respond to `true?` or perhaps you meant `be true` or `be_truthy` # ./spec/unit/request2_spec.rb:29:in `block (2 levels) in ' 4) RestClient::Request ssl verification is successful with the correct ca_path Failure/Error: expect { request.execute }.to_not raise_error expected no Exception, got # with backtrace: # ./lib/restclient/request.rb:413:in `transmit' # ./lib/restclient/request.rb:176:in `execute' # ./spec/integration/request_spec.rb:28:in `block (4 levels) in ' # ./spec/integration/request_spec.rb:28:in `block (3 levels) in ' # ./spec/integration/request_spec.rb:28:in `block (3 levels) in ' 5) RestClient::Request ssl verification is successful with the correct ca_file Failure/Error: expect { request.execute }.to_not raise_error expected no Exception, got # with backtrace: # ./lib/restclient/request.rb:413:in `transmit' # ./lib/restclient/request.rb:176:in `execute' # ./spec/integration/request_spec.rb:19:in `block (4 levels) in ' # ./spec/integration/request_spec.rb:19:in `block (3 levels) in ' # ./spec/integration/request_spec.rb:19:in `block (3 levels) in ' 6) RestClient::Request ssl verification fails verification when the callback returns false Failure/Error: expect { request.execute }.to raise_error(RestClient::SSLCertificateNotVerified) expected RestClient::SSLCertificateNotVerified, got # with backtrace: # ./lib/restclient/request.rb:413:in `transmit' # ./lib/restclient/request.rb:176:in `execute' # ./spec/integration/request_spec.rb:89:in `block (4 levels) in ' # ./spec/integration/request_spec.rb:89:in `block (3 levels) in ' # ./spec/integration/request_spec.rb:89:in `block (3 levels) in ' 7) RestClient::Request ssl verification is unsuccessful with an incorrect ca_path Failure/Error: expect { request.execute }.to raise_error(RestClient::SSLCertificateNotVerified) expected RestClient::SSLCertificateNotVerified, got # with backtrace: # ./lib/restclient/request.rb:413:in `transmit' # ./lib/restclient/request.rb:176:in `execute' # ./spec/integration/request_spec.rb:54:in `block (4 levels) in ' # ./spec/integration/request_spec.rb:54:in `block (3 levels) in ' # ./spec/integration/request_spec.rb:54:in `block (3 levels) in ' 8) RestClient::Request ssl verification is unsuccessful with an incorrect ca_file Failure/Error: expect { request.execute }.to raise_error(RestClient::SSLCertificateNotVerified) expected RestClient::SSLCertificateNotVerified, got # with backtrace: # ./lib/restclient/request.rb:413:in `transmit' # ./lib/restclient/request.rb:176:in `execute' # ./spec/integration/request_spec.rb:43:in `block (4 levels) in ' # ./spec/integration/request_spec.rb:43:in `block (3 levels) in ' # ./spec/integration/request_spec.rb:43:in `block (3 levels) in ' 9) RestClient::Request ssl verification is successful using the default system cert store Failure/Error: expect {request.execute }.to_not raise_error expected no Exception, got # with backtrace: # ./lib/restclient/request.rb:413:in `transmit' # ./lib/restclient/request.rb:176:in `execute' # ./spec/integration/request_spec.rb:63:in `block (4 levels) in ' # ./spec/integration/request_spec.rb:63:in `block (3 levels) in ' # ./spec/integration/request_spec.rb:63:in `block (3 levels) in ' 10) RestClient::Request ssl verification succeeds verification when the callback returns true Failure/Error: expect { request.execute }.to_not raise_error expected no Exception, got # with backtrace: # ./lib/restclient/request.rb:413:in `transmit' # ./lib/restclient/request.rb:176:in `execute' # ./spec/integration/request_spec.rb:101:in `block (4 levels) in ' # ./spec/integration/request_spec.rb:101:in `block (3 levels) in ' # ./spec/integration/request_spec.rb:101:in `block (3 levels) in ' 11) RestClient::Request ssl verification executes the verify_callback Failure/Error: expect {request.execute }.to_not raise_error expected no Exception, got # with backtrace: # ./lib/restclient/request.rb:413:in `transmit' # ./lib/restclient/request.rb:176:in `execute' # ./spec/integration/request_spec.rb:77:in `block (4 levels) in ' # ./spec/integration/request_spec.rb:77:in `block (3 levels) in ' # ./spec/integration/request_spec.rb:77:in `block (3 levels) in ' Deprecation Warnings: Using `should_receive` from rspec-mocks' old `:should` syntax without explicitly enabling the syntax is deprecated. Use the new `:expect` syntax or explicitly enable `:should` instead. Called from /ruby-rest-client-1.8.0/spec/unit/abstract_response_spec.rb:63:in `block (2 levels) in '. Using `should` from rspec-expectations' old `:should` syntax without explicitly enabling the syntax is deprecated. Use the new `:expect` syntax or explicitly enable `:should` with `config.expect_with(:rspec) { |c| c.syntax = :should }` instead. Called from /ruby-rest-client-1.8.0/spec/unit/abstract_response_spec.rb:64:in `block (2 levels) in '. If you need more of the backtrace for any of these deprecations to identify where to make the necessary changes, you can configure `config.raise_errors_for_deprecations!`, and it will turn the deprecation warnings into errors, giving you the full backtrace. 2 deprecation warnings total Finished in 0.20544 seconds (files took 0.69382 seconds to load) 225 examples, 11 failures Failed examples: rspec ./spec/unit/request_spec.rb:363 # RestClient::Request proxy creates a non-proxy class if a proxy url is not given rspec ./spec/unit/request_spec.rb:358 # RestClient::Request proxy creates a proxy class if a proxy url is given rspec ./spec/unit/request2_spec.rb:23 # RestClient::Request closes payload if not nil rspec ./spec/integration/request_spec.rb:22 # RestClient::Request ssl verification is successful with the correct ca_path rspec ./spec/integration/request_spec.rb:13 # RestClient::Request ssl verification is successful with the correct ca_file rspec ./spec/integration/request_spec.rb:81 # RestClient::Request ssl verification fails verification when the callback returns false rspec ./spec/integration/request_spec.rb:48 # RestClient::Request ssl verification is unsuccessful with an incorrect ca_path rspec ./spec/integration/request_spec.rb:37 # RestClient::Request ssl verification is unsuccessful with an incorrect ca_file rspec ./spec/integration/request_spec.rb:57 # RestClient::Request ssl verification is successful using the default system cert store rspec ./spec/integration/request_spec.rb:92 # RestClient::Request ssl verification succeeds verification when the callback returns true rspec ./spec/integration/request_spec.rb:66 # RestClient::Request ssl verification executes the verify_callback Randomized with seed 41161 /usr/bin/ruby2.1 /usr/bin/rspec --pattern ./spec/\*\*/\*_spec.rb failed ERROR: Test "ruby2.1" failed. Exiting. dh_auto_install: dh_ruby --install /ruby-rest-client-1.8.0/debian/ruby-rest-client returned exit code 1 debian/rules:15: recipe for target 'binary' failed make: *** [binary] Error 1 dpkg-buildpackage: error: debian/rules binary gave error exit status 2